MDL-C160 High Impact Frequency Anchor Drilling Rig Hydraulic System
High Power Virbration Foundation
Quick Detail:
1. MDL-C160 is applicable to a wide-range of strata,it mainly be used
for deep construction,fundation pit,slope support,pipe shed etc.
2.The top of the power head can vibrate with big power without DTH
hammer or air compressor, especially when the moisture content of local layer is too high to
use DTH hammer when work, this top head drive drill rig is the only
choice.
3. The drilling tools from the outer to the inner and all involved in
the transmission of the impact power, it is not easy to happen the
hole accidents such as drill sticking.
4. When meeting those fragile holes such as sand gravel layer,
gravel layer, sand stone soil, sand hole, the top drive drill
equipment has a very high penetration rate and drilling efficiency.
Description:
1. MDL-C160 is a kind of full hydraulic power head anchor crawler drilling rig
. Its drilling depth is 130-170m, and drilling diameter
150-250mm.It is applicable to a wide-range of strata,it mainly be used for deep
construction,fundation pit,slope support,pipe shed etc.
2. MDL-C160 is applicable to a wide-range of strata with big torque,
high rotary speed, and big power.
3.This top head drive drill rig adopts variable hydraulic system and
can vibrate with big power without DTH hammer or air compressor.Especially when the moisture content of local layer is too high to
use DTH hammer when work, this top head drive drill rig is the only
choice.
3. When meeting those fragile holes such as sand gravel layer,
gravel layer, sand stone soil, sand hole, the top drive drill
equipment has a very high penetration rate and drilling efficiency.
4. The drilling tools from the outer to the inner and all involved in the transmission of the impact power, it is not easy to happen the hole accidents such as drill
sticking.
5.It has the long stoke and easy to operate.
Specifications:
| Hole depth | 130-170m |
| Rod dia | 150-250mm
|
Hole angle
| 0-90° |
| Output rotary speed of power head | 8, 15, 25,30,50, 65, 80r/min |
| Stroke of power head | 3000mm |
| Output torque of power head | 10000N.m |
| Impact power | 400-600N.m |
| Impact frequency | 1500-2600min-l |
| Lifting force | 78KN |
| Feeding force | 40KN |
| Stroke of slide frame | 1500mm |
| Power | Electric motor: | 55+18.5+3KW |
| Weight | 7000KG |
| Dimensions (L×W×H) | 5400×2200×2200mm |
Applications:
1. Anchor hole, such as urban foundation pit supporting .
2. It is mainly applied to construction engineering supporting, slope
supporting,all kinds of guide hole, tunnel and pipe shed
engineering, etc.
