MDL-C160 Electric Power Air Compressor Rotary Drilling Rig Big
Torque High Speed
Quick Detail:
1. The top of the power head can vibrate with big power without DTH
hammer or air compressor.
2. The drilling tools from the outer to the inner and all involved in
the transmission of the impact power, it is not easy to happen the
hole accidents such as drill sticking.
3. MDL-160G is applicable to a wide-range of strata with big torque,
high rotary speed, and big power.When meeting those fragile holes
such as sand gravel layer, gravel layer, sand stone soil, sand
hole, the top drive drill equipment has a very high penetration
rate and drilling efficiency. Especially when the moisture content
of local layer is too high to use DTH hammer when work, this top
head drive drill rig is the only choice.
Description:
1. MDL-C160 is a kind of full hydraulic power head anchor crawler drilling rig
. Its drilling depth is 130-170m, and drilling diameter 150-250mm.
2. MDL-C160is applicable to a wide-range of strata with big torque,
high rotary speed, and big power.When meeting those fragile holes
such as sand gravel layer, gravel layer, sand stone soil, sand
hole, the top drive drill equipment has a very high penetration
rate and drilling efficiency. Especially when the moisture content
of local layer is too high to use DTH hammer when work, this top
head drive drill rig is the only choice.
3. This top head drive drill rig adopts variable hydraulic system
and can vibrate with big power without DTH hammer or air
compressor..The drilling tools from the outer to the inner and all involved in the transmission of the impact power, it is not easy to happen the hole accidents such as drill
sticking.
4. This top drive drill equipment is applicable to anchor hole, such
as urban foundation pit supporting . And is mainly applied to
construction engineering supporting, slope supporting,all kinds of
guide hole, tunnel and pipe shed engineering, etc.
Specifications:
| Hole depth | 130-170m |
| Rod dia | 150-250mm
|
Hole angle
| 0-90° |
| Output rotary speed of power head | 8, 15, 25,30,50, 65, 80r/min |
| Stroke of power head | 3000mm |
| Output torque of power head | 10000N.m |
| Impact power | 400-600N.m |
| Impact frequency | 1500-2600min-l |
| Lifting force | 78KN |
| Feeding force | 40KN |
| Stroke of slide frame | 1500mm |
| Power | Electric motor: | 55+18.5+3KW |
| Weight | 7000KG |
| Dimensions (L×W×H) | 5400×2200×2200mm |
Applications:
1. Anchor hole, such as urban foundation pit supporting .
2. It is mainly applied to construction engineering supporting, slope
supporting,all kinds of guide hole, tunnel and pipe shed
engineering, etc.
